Transmission trouble codes are particularly annoying to the average driver. You might know what a misfire is, but what does it mean when you get a code for a failed governor pressure solenoid? Fortunately, K & K Automotive in Frederick, MD is here to help.

At K & K Automotive in Frederick, MD, we’ve witnessed our fair share of burnt out and broken clutches. While clutch failure is an inevitability, there are a variety of ways to make sure yours lasts as long as possible.

If you’re reading this, you probably not excited to be here; the time has come for a new transmission. Fortunately, we at K & K Automotive are here to offer you solutions, and let you know that it’s not all bad. Replacing a tired and worn transmission will truly bring your car back to life, and you’ll probably be glad you did it.

At K & K Automotive in Frederick, transmissions are our game, and taking care of them is at the top of our list of priorities. Here are 5 things you can do to take care of your transmission, from the pros:

At K & K Automotive, there’s a reason we’re the top rated truck repair center in Frederick, MD; we do it all. While many shops shy away from the more complicated aspects of truck repair, we have the tools and people to get the job done.

For all your transmission repair and maintenance needs, trust the specialists with the knowledge and ability necessary to keep your car, truck, or SUV reliably on the road. At K & K Automotive in Frederick, MD, we prioritize quality over everything. A huge aspect of that goal is keeping up with the technology of the modern era.

Transmission slippage can be caused by a variety of factors that are sometimes difficult to pin down. From K & K Automotive in Frederick, MD, here’s a rundown of the more common issues that may cause a transmission to slip. Our highly trained technicians are ready to get you going with a top transmission.

Transmission slippage can be caused by a variety of factors which are sometimes difficult to pin down. From K & K Automotive in Frederick, MD, here’s a rundown of the more common issues that may cause a transmission to slip.

At K & K Automotive in Frederick, MD, we understand the intricacy and complexity of your transmission. That’s why we always treat it with the same attention to detail as the engineers that designed it, no matter what type of car, truck, or SUV you drive.

You’ve likely encountered someone talking about their car or truck transmission "slipping”. What does that mean, why does it do it, and where do you go from here? At K & K Automotive in Frederick, MD, our trained staff has the answers to get you safely back on the road. Transmission slippage is certainly one of the most dreaded issues you face as the owner of a car or truck’s and there are some indicators that let you know that something is wrong.

There have been a lot of technological advancements, and breakthroughs in efficiency to make modern cars, trucks, and SUVs so much more fuel-efficient than their counterparts. While engine design certainly plays a huge role, automatic transmissions have come a long way as well, contributing greatly to the gas mileage of your vehicle. From K & K Automotive in Frederick, MD, here are some ways transmissions have changed to meet the demands of fuel efficiency.

Your transmission suddenly isn’t shifting right. So what’s wrong with it? Do you need your transmission rebuilt? Good question. Unfortunately, the answer is: No one knows. At least, not yet. To find out what’s causing your transmission problem, a technician is going to have to perform a series of tests. Basically, these tests are designed to answer the simple question: “Is it inside or outside?” That is, is the problem inside the transmission, or in one of the many control systems that operate the transmission?

Nobody wants to put an engine or transmission in their car. However, when that time comes, it’s important to make an informed decision - here are some things to consider when installing a used engine or transmission, from K & K Automotive in Frederick, MD.

It can be very alarming to hear unusual sounds coming from your vehicle. If you are hearing any humming, whining, or even clunking noises emitting from under your vehicle, it is most likely a transmission issue. Luckily, these noises can help you pinpoint what issue you may be having with your transmission. Some of these issues are minor and can be easily taken care of, but some of them are much more major and may require special attention and service. Read on to see just what your transmission problem may be.

At K & K Automotive in Frederick, MD, we know that transmissions are witchcraft to most people. More often than not, if major damage has occurred, it’s a lot more time and cost effective to just replace the entire unit and get a fresh start. Here’s what to look out for, from K & K Automotive in Frederick, MD.

U-joints are a small, simple component - in fact, they have changed much since the very first automobiles. However, on any vehicle with a driveshaft, its ability to move depends entirely on the u-joint being there. You’ll often hear “maybe it’s the u-joints” as a solution offered for problems with a vehicle - but what are they, what do they do, and how do you know if yours is bad? K & K Automotive in Frederick, MD has the answers.

At K & K Automotive in Frederick, MD, transmissions are our specialty. We know exactly how they work and exactly how to maintain and repair one. You know you have a transmission, and you know it’s important, but what does it actually do? Here’s the simple answer to a complicated question.

At K & K Automotive in Frederick, our goal is to keep your car, truck, or SUV shifting and riding as smoothly as it did the day it rolled off the lot. A big part of that is the mounting hardware that keeps the moving parts in your drivetrain running smooth.

Sometimes your car, truck, or SUV stops performing quite like it used to. At K & K Automotive in Frederick, we can fix that. A simple but common issue on vehicles equipped with a manual transmission is shifter bushing issues. Your shifter has a bushing on the end of it, where it connects to the actual transmission. Its purpose is to provide tight, smooth shifting. 

You’ve probably heard the term “transmission flush” before at some point in your automotive experience. But what exactly does it mean to have your transmission flushed, and why does it matter? K & K Automotive in Frederick, MD has the answers.